E-Mail

We use two GMRS and Two ATX-2000A to infrastructure a better FRS  repeater.

As the photo shows in follow:

We set left side to be Channel A and Code AA

(better from CH 1 to 7)

Another right side to be Channel B and Code BB
(better from CH 8 to 14)

So we can put group A use Channel A Code AA,

And Group B use Channel B Code BB.

This will let people from group A can call people

In group B through our repeater but without any

Echo voice feedback.

Since We put a special interface cable to link two

GMRS with two ATX-2000A, this interface cable

Cross over inside and that will receiving signal from

Channel A then transmitting to Channel B.

Vice versa the people from group B return to group A

Can through our repeater but without any Echo voice feedback. 

   **** This should turn on CTCSS Code function****

I believe this can solved most of the concern of the Echo voice feedback problems from the customers.

This will more like a professional repeaters as market the only we have to adapt is the voice delay.

BACK